what is IP Subnet Calculator?
An IP subnet calculator is a tool used to determine various network parameters associated with Internet Protocol (IP) subnets. These parameters include the network address, broadcast address, available host addresses, subnet mask, and more.
You can find our IP Subnet Calculator here –
https://www.readmyip.com/subnetcalculator/
Suggested: What is a Virtual IP Address – Purpose and Benefits
What is Subnetting?
Subnetting is the process of dividing the network when the network becomes vast to control and performance numbers hit an all-time low as a result of enormous traffic. In this case, subnetting calculator can be used to identify the different divisions.
The network congestion problem can be effectively solved by breaking the TCP/IP network into smaller, more manageable pieces.
A subnet is a break-up of an IP network (internet protocol suite), where an IP network is a set of communications protocols used on the Internet and other related networks. This is also recognized as TCP/IP (Transmission Control Protocol/Internet Protocol).
The act of dividing a network into at least two separate networks is called subnetting. Routers are devices that allow traffic exchange between subnetworks, serving as a physical boundary. The most common network addressing architecture used is IPv4.
Related: IP Address and How to Use IP Checker
An IP address comprises three significant classes, Class A, Class B, and Class C.
- Class A with over 16 million IP addresses.
- Class B with 65,535 IP addresses.
- Class C with 254 IP addresses.
Without the subnetting; you would only use one network from each class. Assuming you need 150 addresses, then you need the license of Class C for subnetting to be executed.
Recommended: Find My IP Address
What is a Subnet Mask?
A subnet mask is a 32-bit number that calculate the potential range of IP addresses in a network. Each subnet mask defines how many IP addresses can be on a single network, and you can use the multiple subnet masks to classify an entire network into sub-subnets.
A subnet mask splits the IP address into the host and network parts, thus defining which part belongs to the network and the device. When building a network, it’s necessary to balance the network and the host part of an internet protocol address to avoid too many networks to route to and too few hosts in a network.
What is a Subnet Calculator?
Subnet Calculator is an IP tool mostly used mostly by Network and IT professionals for calculating the subnets. You feed the Subnet Calculator a range of IP addresses or CIDR notations and it calculates a list of subnets for you.
You can find our IP Subnet Calculator here –
https://www.readmyip.com/subnetcalculator/
Importance of IPv4 Subnet Calculator
Every subnet possesses an address to depict it. The subnets are interconnected via router. For the router to discover whether the incoming IP packet has to be routed to any of its subnetwork, the router needs network address and subnet mask.
The subnet calculator is an IP tool for finding the number of possible subnets for any supplied network address block. You can select the combination of subnets and number of hosts per subnet that fits your network and get the host address range and broadcast address for the supplied subnet mask.
Also read: What is Global DNS Propagation
Recommended: Find My IP Address
How to Use Our IP Subnet Calculator
- Just simply open OUR IP Subnet Calculator link IP Subnet Calculator
- Enter the IP address range or Subnet Mask.
- Then click Calculate